 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
 |
 |
 |
 |
||||||||||||
 |
|
||||||||||||||
 |
 |
 |
|
||||||||||||
 |
|
||||||||||||||
 |
 |
 |
|
||||||||||||
 |
|
||||||||||||||
 |
 |
 |
|
||||||||||||
|
|||||||||||||||
 |
|
||||||||||||||
 |
 |
 |
|
||||||||||||
 |
|
||||||||||||||
 |
 |
 |
|
||||||||||||
 |
|
||||||||||||||
 |
 |
 |
|
||||||||||||
 |
|
||||||||||||||
Below is this list of items we have images for in order by part number. We have tried to keep all descriptions with the actual item first and then the details, if any, about that item. i.e. Board assembly SI-1 would be SI-1 board assembly as well a Collet tool would be Tool, collet. Just click on the link for an image of the item.
| 000839-15 | Spring - compression straight | |
| 001291-14 | Brass plug | |
| 002823-19 | Cylinder - head | |
| 003355-13 | Retainer spring | |
| 003493-57 | Screw, adjusting air shoe | |
| 004962-16 | Knob | |
| 006867-17 | Air shoe | |
| 006867-25 | Air shoe | |
| 006869-15 | Air shoe | |
| 006870-12 | Air shoe | |
| 006873-19 | Air shoe | |
| 006873-27 | Air shoe | |
| 006873-35 | Air shoe | |
| 006873-43 | Air shoe | |
| 006981-18 | Air shoe | |
| 007170-17 | Collet wrench | |
| 007281-13 | Lead screw insert | |
| 007324-12 | Retainer | |
| 007330-22 | Shaft - piston | |
| 007428-17 | Air shoe | |
| 007429-16 | Air shoe | |
| 007487-15 | Bellows | |
| 007487-23 | Bellows | |
| 008070-16 | Flow switch with two adapters | |
| 008070-24 | Flow switch - brass (See 008070-16) | |
| 008070-32 | Flow switch with inlet adapter | |
| 009417-16 | Servo motor without encoder | |
| 009421-28 | Servo motor with encoder | |
| 009422-19 | Sleeve - nylon | |
| 009737-19 | Bellows | |
| 009787-26 | Rod - piston drill/rout | |
| 009788-17 | Cylinder | |
| 009789-16 | Screw - pan head | |
| 009797-16 | Guide | |
| 009798-15 | Washer - nylon | |
| 009997-14 | Cable assembly for quiet drill spindle - with connector | |
| 009997-22 | Cable assembly for quiet drill spindle - with spade lug | |
| 111016-01 | Tool holder | |
| 111022-01 | Collet - auto tool changer | |
| 115001-03 | Chip removal brush 2 1/2" OD x 0.875" | |
| 115002-01 | Chip removal brush 2 1/2" x 1.0" | |
| 115013-01 | Brush holder assembly | |
| 115018-01 | Brush holder | |
| 115024-01 | Brush - chip removal 1 1/2" | |
| 118108-01 | Chip removal brush 3" OD x 0.875" | |
| 118108-02 | Chip removal brush 3" OD x 1.25" | |
| 121000-01 | Idler | |
| 14-907-0401-01 | Brush - slide component pressure foot | |
| 14-907-1538-01 | Block, exh. collector mtg | |
| 151003-01 | Nut - modified collet | |
| 200496-15 | Window assembly - pressure foot, standard | |
| 200517-10 | Tool change assembly for drill | |
| 200609-27 | Body, insert - drill | |
| 200610-16 | Ring, insert retaining - drill | |
| 200725-18 | Piston | |
| 200834-16 | Bellows | |
| 200987-37 | TAC-1 board assembly | |
| 201194-18 | Cylinder | |
| 201196-16 | Retainer - seal | |
| 201445-15 | Bearing for 820 spindle | |
| 201504-13 | Piston rod assembly drill/rout | |
| 201513-12 | Rod - piston | |
| 201523-10 | Tool change assembly for drill/rout | |
| 201524-27 | Body, insert for drill/rout | |
| 201525-18 | Ring, insert retaining for drill/rout | |
| 201546-13 | Brush assembly | |
| 201573-##B | Ring - tool (Bag of 1000) | |
| 201573-## | Ring - tool (Each) | |
| 201573-50 | ||
| 201907-16 | Vacuum manifold - drill | |
| 202072-21 | Spring, gas | |
| 202143-26 | Step pin - 1.5L x .125 shank | |
| 202163-13 | Collet, drill | |
| 202378-14 | Slide - pressure foot, clamp | |
| 202416-18 | DC-2 board assembly (See 702416-17) | |
| 202430-10 | Cover-housing,spring centering | |
| 202431-19 | Bushing - drill/rout, pressure foot | |
| 202450-23 | Bearing for 1010 spindle | |
| 202470-11 | Brush with O-ring - Drill - 3/8" ID | |
| 202470-29 | Brush with O-ring - Drill - 9/16" ID | |
| 202481-26 | Disc - hold down | |
| 202482-17 | Insert assembly - pressure foot | |
| 202482-25 | Insert assembly - pressure foot | |
| 202577-13 | Pressure foot assembly - sliding | |
| 202580-18 | Window assembly - pressure foot standard for drill/rout | |
| 202585-13 | Clevis | |
| 202586-12 | Support-drill- drill/rout | |
| 202586-46 | Support - 880 spindle | |
| 202610-12 | Disc hold down | |
| 202614-18 | Brush, drill/rout - large ID w/ports | |
| 202667-22 | Tool - collet | |
| 202732-15 | Label - air sleeve | |
| 202747-18 | Rod - piston | |
| 202786-10 | Ball joint | |
| 202787-19 | Rod - guide | |
| 202807-15 | Ring - wear | |
| 202814-16 | Cylinder & clevis assembly | |
| 202816-10 | Tool - spindle elevation | |
| 202816-14 | Tool - spindle elevation | |
| 202816-22 | Tool - spindle elevation | |
| 202816-48 | Tool - spindle elevation | |
| 203076-17 | Tool - gripper | |
| 203083-42 | SI-1 board assembly | |
| 203754-24 | Stator assembly | |
| 203793-19 | Collet tool & gage assembly - go | |
| 203793-35 | Collet tool & gage assembly - go | |
| 204014-28 | Ball screw & nut assembly | |
| 204014-36 | Ball screw & nut assembly | |
| 204179-11 | Air cylinder | |
| 204444-10 | Seal kit - high pressure | |
| 204534-11 | Z-axis locknut | |
| 204580-14 | Head - cylinder | |
| 204581-13 | Valve, check | |
| 204594-18 | Module - PWM amplifier | |
| 204594-42 | Module - PWM amplifier | |
| 204837-15 | Membrane panel | |
| 204848-12 | Z-axis interface board assembly | |
| 204865-10 | Z-axis buffer PC board assembly | |
| 205061-19 | Filter - air | |
| 205250-10 | Air shoe assembly | |
| 205251-19 | Air shoe assembly | |
| 205276-10 | Valve - 5-port | |
| 205664-10 | Pressure foot - drill | |
| 205907-25 | Stator assembly | |
| 206166-11 | Insert - pressure foot - drill/rout | |
| 206325-19 | PM-2 board assembly | |
| 206405-12 | Spindle assembly 420 | |
| 206407-10 | Spindle assembly 820 | |
| 206409-18 | Spindle assembly 1010 | |
| 206477-15 | Zif-2 board - Z-axis | |
| 208054-12 | Cable assembly - DAC board | |
| 208146-20 | Sony cable - minor axis TMS | |
| 208489-17 | Valve - 4-way assembly | |
| 208561-18 | Nut - bearing retaining | |
| 208563-16 | Nut - bearing retainer | |
| 208949-52 | Disc - pressure foot | |
| 208991-18 | Minor axis cab replacement kit | |
| 209367-12 | Pin - rocker shaft | |
| 209380-15 | Pin assembly - rocker shaft | |
| 210003-36 | Rotating kit assembly | |
| 210004-19 | Rotating kit assembly | |
| 210263-23 | Drawbar | |
| 210528-16 | Floppy disc control board, low-capacity | |
| 210590-19 | Drawbar | |
| 210724-18 | Power driver interface board assembly | |
| 211091-11 | Rod - piston, micro drill | |
| 211212-15 | Lead screw, Z-axis - micro drill | |
| 211635-14 | SI-3 board assembly | |
| 211702-12 | Label - magazine, TMS, multicolor | |
| 211702-20 | Label - magazine, TMS, white | |
| 211882-14 | Washer - spring - belleville (820) | |
| 211882-22 | Washer - spring - belleville (1010) | |
| 211933-21 | Frequency converter board assembly | |
| 211947-17 | Piston, TMS standard (See 218025-17) | |
| 211951-10 | Gasket - valve subplate | |
| 211953-18 | Detector assembly | |
| 211953-26 | Detector assembly | |
| 211960-19 | Stop - upper, piston | |
| 211968-11 | Collet - TMS standard | |
| 211991-20 | Magazine - TMS without handle | |
| 212062-14 | Emitter assembly | |
| 212133-19 | Air switch assembly | |
| 212283-17 | Sleeve collet | |
| 212284-16 | Piston assembly | |
| 212300-16 | Nut - collet unlock switch | |
| 212804-58 | Z-axis assembly - 10mm without motor | |
| 212876-10 | Piston rod, drill/rout | |
| 212877-19 | Cover | |
| 212938-16 | Collet drill/rout - 1/8" (see also 212938-1654) | |
| 213014-11 | Drive assembly - Z-axis servo 10mm | |
| 213018-17 | Collet - ABW non-locking | |
| 213054-20 | Spindle select 2 board | |
| 213395-10 | Housing assembly | |
| 213402-11 | TMSI-1 board assembly | |
| 213647-16 | Clamp - pinning, vee tip | |
| 213725-11 | Ammo box - magazine holder | |
| 213916-02 | Air shoe assembly - support | |
| 213916-10 | Air shoe | |
| 213917-19 | Nut - lock | |
| 213987-22 | Emitter assembly | |
| 213988-21 | Detector assembly - TMS | |
| 213999-02 | Air shoe | |
| 214287-19 | Lead screw, independent z-axis | |
| 214303-03 | Rod - 5.15 | |
| 214437-18 | Cable assembly - spindle assembly / spindle select | |
| 214475-11 | Sleeve - nylon | |
| 214612-15 | Insert | |
| 215077-10 | Diaphragm | |
| 215086-19 | Pressure foot assembly drill | |
| 215123-14 | Clevis | |
| 215375-35 | Spindle assembly ABWR80 | |
| 215388-14 | Air shoe - guide B major MK V | |
| 215389-13 | Air shoe - guide A major MK V | |
| 215393-17 | Air shoe assembly - guide B minor | |
| 215426-26 | OSI-2 board assembly | |
| 215452-15 | Spindle assembly 880 | |
| 215473-10 | Spindle elevation tool | |
| 215634-16 | I/O-1 board assembly | |
| 215662-11 | Lock spring assembly | |
| 215765-41 | Shaft - pressure foot | |
| 215782-02 | Card cage assembly | |
| 215944-11 | Solenoid assembly | |
| 216046-16 | Locknut - bearing for 420 & 820 spindles | |
| 216047-15 | Locknut - bearing for 1010 spindles | |
| 216080-13 | Sleeve - adaptor, regular pressure foot | |
| 216333-18 | Gasket - pressure foot, drill | |
| 216333-26 | Gasket - pressure foot, drill | |
| 216365-19 | Flat pin assembly - tooling plate | |
| 216390-18 | Collet for ABWR80, non-locking | |
| 216412-12 | Air shoe assembly - support | |
| 216416-18 | Retainer, air shoe | |
| 216668-13 | Collet removal tool | |
| 216754-18 | Washer | |
| 216759-13 | Plug - soft, tooling, brass | |
| 216761-19 | Collet maintenance kit for 1/8" drill | |
| 216824-14 | Collet air bearing locking | |
| 216844-10 | Collet for ABWR80 locking, 1/8" | |
| 217001-17 | Bearing | |
| 217223-19 | Pressure foot insert for LTC, .563 snap in | |
| 217379-04 | Floppy drive replacement kit, 3.5" | |
| 217622-16 | Housing & sleeve assembly (See 717622-15) | |
| 217686-04 | Cable assembly for TMG Sensor to DCSP Board | |
| 217686-27 |
|
Cable assembly for TMG |
| 217740-13 |
|
Armature assembly |
| 217740-21 | Armature assembly | |
| 217841-11 | Cable assembly for controller board | |
| 217842-10 | Cylinder assembly for edge clamp | |
| 218023-19 | Sleeve - collet | |
| 218024-18 | Transfer collet, tool change - 10mm | |
| 218025-17 | Piston Assembly -TMS 10mm | |
| 218041-17 | Cylinder assembly - spindle, edge clamp | |
| 218042-16 | Electronics - LTC Buffer | |
| 218177-03 | Pressure foot assembly without electrics | |
| 218178-09 | Insert assembly - .265 magnetic | |
| 218178-12 | Magnetic insert - .563 | |
| 218305-18 | Spindle select-3 board assembly | |
| 218431-15 | Screw - shoulder | |
| 230046-03 | Cable for spindle assembly to circuit breaker 230" | |
| 230134-01 | Flag - plastic | |
| 230205-03 | Coupling for system 2000 | |
| 230571-02 | Flag assembly - depth control | |
| 230574-01 | Spring - latch | |
| 230575-01 | Spring - guide | |
| 230581-02 | Holder assembly - beam management magazine | |
| 230615-01 | Sensor - TMG | |
| 230695-01 | Elbow - 90 degree | |
| 231015-01 | Insert - pressure foot, CS-5000 | |
| 231055-02 | Insert | |
| 231055-04 | Insert, pressure foot | |
| 231126-01 | Knob - adjustment | |
| 231209-01 | Sheave - roller bearing | |
| 232039-01 | Spring - flat | |
| 232331-01 | Vacuum gate - 2" mod system 2000 | |
| 232417-01 | Straight edge - short movable pin | |
| 232418-01 | Straight edge - long movable pin | |
| 232524-01 | Magnetic insert .400 | |
| 232524-02 | Magnetic insert .265 | |
| 232524-03 | Magnetic insert .140 | |
| 232560-01 | Holder | |
| 233334-01 | Straight edge for tooling plate | |
| 233944-01 | Replaced by 237074-01 | |
| 233964-01 | Finger | |
| 233964-02 | Finger | |
| 234409-01 | Plungler assembly board present | |
| 234464-01 | SVO cont - SC 902 Z-axis | |
| 234490-01 | Jaw - gripper | |
| 234593-05 | Movable pin assembly | |
| 234593-07 | Movable pin assembly | |
| 234593-11 | Movable pin assembly | |
| 234823-02 | Cylinder assembly - spindle, edge clamp | |
| 235289-01 | SVO cont - SC903 Y-axis, @ 1000IP | |
| 235520-01 | MOV 230V board assembly | |
| 235560-01 | Cylinder assembly, 3/16 rod | |
| 235560-02 | Cylinder assembly - spindle 3/16" rod | |
| 235948-01 | Retrofit - contacter | |
| 236648-01 | Sensor assembly - photoelectric | |
| 236666-03 | Wire rope 110" | |
| 237059-01 | Retrofit kit, anti-vibration | |
| 237100-01 | Pad - heat, silicon rubber | |
| 237280-01 | Heat pad assembly - BTC | |
| 237398-01 | Restrictor - sensor lens | |
| 237535-01 | Straight edge, new design | |
| 330025 | Gear conveyor drive motor | |
| 400077-18 |
|
Elbow 1/4" OD x 1/8" MP |
| 400140-11 | Fitting - hose, ductall 3/4" ID | |
| 400141-10 | Hose fitting 1.5" ID | |
| 400161-15 | Brush - motor | |
| 400175-19 | Ball bearing | |
| 400181-11 | Elasticone cover | |
| 400327-16 | Sleeve | |
| 400328-15 | Sleeve, poly flo 3/8 | |
| 400377-15 | Washer | |
| 402103-12 | Relay - 24VDC 3PDT | |
| 402169-13 | Resistor - PMR202MD 6500K220 | |
| 402192-14 | Fuse - 15 AMP one time | |
| 402198-18 | Fuse 50 AMP slo-blo | |
| 402229-11 | Lamp - 28V 4AMP | |
| 402239-19 | Lamp - reader | |
| 402395-19 | Brush - reader | |
| 402706-13 | Fan assembly | |
| 402888-13 | Hose - recoil, nycoil | |
| 402897-12 | Regulator - air | |
| 402948-11 | Fuse - normal, .06 AMP | |
| 403053-10 | Element - filter | |
| 403178-10 | Transducer - H P 7DCDT-1000,B11 | |
| 403208-14 | Fan 115V AC | |
| 403222-16 | Fuse 1/16AMP slo-blo | |
| 403428-18 | Coupling - flex, Z-axis | |
| 403431-13 | Ball bearing | |
| 403432-12 | Ball bearing | |
| 403433-11 | Ball bearing | |
| 403436-18 | Lock washer | |
| 403479-16 | Element - filter | |
| 403713-12 | Ring - retaining | |
| 403714-11 | Elbow, poly-flo, 3/8" OD | |
| 403788-12 | Fitting - hose barb | |
| 403828-14 | Potentiometer | |
| 403855-10 | Locknut - new departure | |
| 403856-19 | Lock washer | |
| 403857-18 | Ball bearing | |
| 403858-17 | Ball bearing (idler) | |
| 403952-12 | Coupling | |
| 403989-19 | Filter - air | |
| 404028-10 | Motor brush | |
| 404079-18 | Motor brush | |
| 404411-15 | Air wave switch | |
| 404414-12 | Float Assy | |
| 404470-13 | Elbow | |
| 404480-11 | Coupling - pow-t-flex | |
| 404484-17 | Lamp | |
| 404489-12 | Switch - micro limit | |
| 404611-13 | Transistor - tip41c | |
| 404628-14 | Valve | |
| 404687-12 | Fuse - ceramic 8 AMP | |
| 404912-19 | Spring, tool change | |
| 404924-15 | Fuse - 2.5 AMP, buss | |
| 404993-11 | Transistor - Tip35C | |
| 404994-10 | Transistor - Tip36C | |
| 405059-19 | Motor brush - Electro Craft | |
| 405063-13 | Rectifier | |
| 405220-13 | Elbow | |
| 405231-10 | Valve - solenoid | |
| 405243-16 | Pilot valve - air | |
| 405420-11 | Seal | |
| 405427-14 | Spring | |
| 405433-16 | Washer - wave | |
| 405456-18 | Bearing - bronze | |
| 405457-17 | Cylinder - air | |
| 405465-17 | Nut & sleeve 1/4" | |
| 405470-10 | Rod ball joint end | |
| 405485-13 | Valve | |
| 405487-11 | Valve | |
| 405504-10 | Valve | |
| 405529-11 | Spring | |
| 405533-15 | Valve body | |
| 405557-16 | Compression sleeve | |
| 405565-16 | Fan motor 1/180 HP 230V | |
| 405576-13 | Element filter | |
| 405600-13 | Micro switch | |
| 405608-15 | Transistor for PTI Switch Module | |
| 405620-19 | Contacter | |
| 405663-17 | Air regulator 3/8" | |
| 405750-11 | Fuse - 15 AMP 600V dual element | |
| 405786-19 | Clip - safety | |
| 405787-18 | Stud - ball, 10mm | |
| 405791-12 | Spring - compression | |
| 405878-18 | Washer - steel | |
| 405885-19 | Valve - 3-way cartridge | |
| 405978-17 | Nut - tube coupling | |
| 405979-16 | Compression sleeve | |
| 405981-12 | Switch - emergency stop | |
| 406016-19 | Power supply - compact | |
| 406048-11 | Sony head | |
| 406074-18 | Relay - solid state 10A | |
| 406079-13 | Contacter - 3 pole with aux. | |
| 406080-10 | Relay | |
| 406109-17 | Air switch | |
| 406112-12 | Contacter | |
| 406145-13 | Pushbutton switch - OFF | |
| 406146-12 | Switch - pushbutton | |
| 406147-11 | Button - micro switch | |
| 406148-10 | Button - micro switch | |
| 406149-19 | Lamp - incandescent | |
| 406172-19 | Switch - pressure 72psi | |
| 406229-12 | Fuse - 1/4 AMP 125-250 V | |
| 406236-13 | Screw - lowhead socket 3/8-16 x 1" | |
| 406236-13 | Screw - lowhead socket 3/8-16 x 1 | |
| 406320-10 | Servo motor D.C. w/tach | |
| 406524-14 | Monitor CNC-6 | |
| 406886-16 | Fuse - 15A 250V | |
| 406887-15 | Fuse - 10A 250VAC high inrus | |
| 406997-16 | ||
| 407083-15 | Rod ball joint end | |
| 407091-15 | Gas spring FC12 | |
| 407312-18 | Valve - 3-way TAC-2 | |
| 407428-19 | Shrink tubing black 1/4 D thin wall | |
| 407480-14 | Valve - 4-way electronic | |
| 407597-14 | Plug - soft, tooling, delrin | |
| 407788-13 | Power supply 150 watts | |
| 407908-18 | Gas spring - MK VI/VII cover | |
| 408068-12 | Relay - miniature | |
| 408077-11 | Relay - miniature | |
| 408187-18 | Seal - piston | |
| 408189-16 | Valve - air pilot actuated | |
| 408523-11 | Bearing - rod end, female | |
| 408896-10 | Rectifier - fast recovery 600 V | |
| 408909-15 | Fuse, microfuse 1 AMP | |
| 408910-12 | Fuse, microfuse 3 AMP | |
| 409154-15 | Element - filter, replacement | |
| 409399-10 | Transistor - module | |
| 409411-14 | Fuse, 20AMP 600V | |
| 409413-12 | Rectifier - bridge 35A 600V | |
| 409416-19 | Capacitor 2000MFD 450V | |
| 409423-10 | Fan - Roton 230V AC | |
| 409441-18 | Transistor - dual power module | |
| 409493-15 | Relay - 3PDT 24VDC | |
| 409549-19 | Gauge, pressure 0-100 | |
| 409568-15 | Spring, compression | |
| 409655-19 | Elbow - swivel, male | |
| 409677-13 | Cylinder - 3/4" bore | |
| 409712-10 | Insert, pressure foot microwave - old style | |
| 409712-28 | Insert, pressure foot microwave - large | |
| 409717-15 | Filter - water 5 micron | |
| 409769-12 | Locknut - bearing | |
| 409770-19 | Lock washer - bearing | |
| 409771-18 | Bearing, duplex - set of 2 | |
| 409777-12 | Set screw, nylon tip 5/16-18 x 1 | |
| 409792-13 | Tool, drill bit extraction | |
| 409827-12 | Circuit breaker | |
| 409833-14 | Fitting - tee, plastic 1/8 x 1/16 | |
| 409834-13 | Filter - air | |
| 409840-15 | Washer - wave spring | |
| 409852-10 | Gauge - pressure, 2.0 dia 1/8 npt | |
| 409916-14 | Gas spring 3.9" | |
| 409935-11 | Bearing, duplex - set of 2 | |
| 409943-11 | Bearing | |
| 410031-12 | Filter - air 25" x 25" x 1" | |
| 410174-19 | Valve - solenoid, 4-way 5-port | |
| 410267-17 | Cylinder - air, rear pivot | |
| 410456-18 | Filter, modular, 5 micron | |
| 410531-17 | Water pump 230V | |
| 410540-16 | Wrench - filter housing | |
| 410593-12 | Valve - 4-way control | |
| 410616-15 | Keyboard for CNC7 | |
| 410635-12 | Cylinder - 3/4" bore auto switch | |
| 410682-14 | Manifold assembly - solenoid, 3-station MK VI D & E | |
| 410686-10 | Bulb - 110V status indicator | |
| 410694-10 | Filter element - 5 micron | |
| 410704-18 | Element - filter, 5 micron | |
| 410705-17 | Element - filter, .01 micron | |
| 410744-10 | Tubing - hi-pressure | |
| 410753-18 | Nut - self locking | |
| 410769-10 | Encoder-Rotary - encoder, cover, 2-bolts, & allen wrench | |
| 410780-15 | Valve - air pilot | |
| 410789-16 | Fitting - 1/8 npt x 1/4 tube | |
| 410831-14 | Seal | |
| 410843-10 | Circuit breaker 5AMP | |
| 410862-16 | Valve - 4-way solenoid | |
| 410957-12 | Seal, quad ring 3/4" ID | |
| 410958-11 | Restrictor, fixed | |
| 411005-12 | Fitting - elbow, 10-32 | |
| 411006-11 | Valve - 4-way air pilot | |
| 411040-19 | Cap - 2" | |
| 411078-14 | Plunger, ball | |
| 411098-10 | Switch-Magnet position sensor | |
| 411107-19 | Filter | |
| 411110-14 | Manifold - vacuum, round | |
| 411247-10 | Insert changer ring seal .79 ID | |
| 411259-15 | Thermistor - ntc 12 AMP | |
| 411260-12 | Thermister | |
| 411319-13 | Motor - brushless | |
| 411462-18 | Switch, photomicrosensor | |
| 411582-01 | Switch - magnet position sensor | |
| 411588-01 | Nut - jam, .312-24 unf x .19 thick | |
| 411653-01 | Gasket | |
| 411680-01 | Power supply 24V | |
| 411685-01 | Switch, turquoise | |
| 411688-01 | Booster - SMC | |
| 411777-01 | Tubing - 1/4 OD, yellow polyurethane | |
| 411897-01 | Air cylinder, pressure foot | |
| 411922-01 | Switch - pressure, low differential | |
| 411937-01 | Disk controller - OMTI | |
| 412010-01 | Scale - heidenhain 720 mm system 2000 S 32" major axis | |
| 412011-01 | Scale - heidenhain 920 mm system 2000 major axis | |
| 412339-01 | Washer, wave | |
| 412350-01 | Cylinder - air dual rod | |
| 412351-01 | Joint - floating 10-32 UNF | |
| 412455-01 | Plug - delrin, .562-18 x .350 | |
| 412638-01 | Timing belt - 90 groove | |
| 412779-01 | Adapter - cable | |
| 412905-01 | Power supply UPS SU7000 | |
| 412914-15 | Cylinder - air, rodless 7.88 | |
| 412962-01 | Nut, spring | |
| 413186-01 | Collet cleaning brush 1/4" | |
| 413253-01 | Linear way | |
| 414281-01 | Retrorit kit for 3.5 hi-cap | |
| 414622-01 | Brush, horse hair | |
| 414741-01 | Collet sur-lock 125K | |
| 414807-01 | Obsolete - do not use | |
| 460269-03 | Screws 10-32 x 3/16 | |
| 480000 | Air cylinder | |
| 480054 | Spring, gas | |
| 480069 | Bearing, barden spindle | |
| 480083 | Chuck nuts - manual collet | |
| 480084 | Collet - .375 | |
| 480085 | 1/8" for 1/8" bits | |
| 480086 | Collet | |
| 480154 | Spring, gas | |
| 480163 | Ball detents | |
| 480166 | Servo motor without encoder - for Kennard X,Y, & Z axis | |
| 480184 | Cylinder, air - bottom unit | |
| 480190 | Encoder - 3/8" | |
| 480191 | Encoder for Kennard | |
| 480194 | Belt, drive - 120" x 1.25" | |
| 480195 | Belt, drive - 134" x 1.25" | |
| 480200 | Belt, drive - 176" x 1.25" | |
| 480204 | Belt, drive - 193" x 1.25" | |
| 480206 | Belt, drive - 197" x 1.25" | |
| 480215 | Belt, drive - 90" x 1.25" | |
| 480271 | Brush insert - drill - Prema 5/8" ID | |
| 480272 | Collet, pneumatic | |
| 509421-19 | Servo motor with encoder - Electro Craft | |
| 510179-11 | Bearing, rear | |
| 510300-13 | Tach brush kit | |
| 510301-12 | Bearing | |
| 510303-10 | Armature | |
| 611000-01 | Spindle assembly 24K standard | |
| 611000-03 | Spindle assembly 36K HS | |
| 706407-19 | Spindle assembly 820 | |
| 706471-10 | SI-2 board assembly | |
| 707604-18 | AMD 128k memory board assembly | |
| 707685-10 | AMD CPU board assembly for drill/rout | |
| 711359-17 | PTI CL-1 board assembly | |
| 715842-13 | Sensor, TMG AMD20 | |
| 716350-31 | Spindle/TSI tuning ring - lock | |
| 906021-29 | BUPS board assembly | |
| 906047-29 | Detector - sony with alarm | |
| 906320-19 | Motor - DC, servo, with tachometer | |
| 906352-10 | Power supply - power one | |
| 906640-12 | Module, switching | |
| 909691-30 | Pressure foot - microwave | |
| 910573-15 | Hard-drive 20 mb | |
| 910810-18 | Module, glentek | |